Hydro-jetting is a process used to clean the interiors of plumbing pipes throughout a home system. High-pressure water flows through the plumbing removing build up inside the pipes. This thoroughly cleans the entire system and prevents backs ups. Most hydro-jetting systems use about 35,000 psi (pounds per square inch). Read on to learn all about hydro-jetting.

How Does It Work?

When hydro-jetting occurs, a nozzle is fed into your drain or into the pipe and it is usually self-propelled because of the pressure. The nozzle used may differ depending on the size of your drain, the application, of the type of clogged material. When the nozzle encounters the clog, be it undissolved food, cloth, thick grease, the high pressure jets streams exert such powerful tear on the material, that it will dissolve.

Hydro-Jetting Process

When you receive this service here are the steps that will occur

  1. The plumber you called will locate the plumbing system cleanout, which gives easy access to the piping throughout your home.
  2. They will then use a camera to inspect your piping and find the clog. This will also search for damage of any kind, such as cracking or crumbling piping, which could be destroyed by this service.
  3. Your plumber will then insert the jetting hose downward into the plumbing lines. This durable hose attaches to a water tank that pressurizes the water.
  4. The water pressure will be adjusted to your piping appropriately. Again the water pressure will be around 35,000 psi.
  5. Once the water starts, the tool moves upward through the plumbing lines as it cleans the walls of the pipes.
  6. Lastly, the tool will remove built up debris from the inside wall of your piping. Gravity pulls the debris down the plumbing system and it will be flushed out safely.

What is Removed?

Residential hydro-jetting can remove sand, silt and lime scale built up. As well as hair clogs, tree pieces, and anything else that has been flushed and built up. Routine hydro-jetting should be done regularly by restaurants to remove built up grease and food particles that haven’t dissolved.

If the hydro-jetting doesn’t fully work, the rest of the residual build up can be removed by using a snake to break it up. Snaking out pipes not only breaks up the clogs, but it leaves the interior walls completely clean and renewed. There are no harsh chemicals used in this process at all.

Completing the Job

Hydro-jetting is frequently used in commercial plumbing. It can also be very beneficial to homeowners. If you are frequently having to snake your pipes, hydro-jetting will eliminate that debris in your plumbing system. This service can highly improve older plumbing lines that have years of buildup. It is also This service is especially useful for homeowners that experience build up from sand and silt. Chemical cleaners and augers usually do not flush these types of debris out too well.

In Summary

Hydro-jetting is such a useful process and can save you hundreds of dollars. If clogs aren’t taken care of they can cause damage that can crack pipes. Instead of just having a clog you will then have cracked pipes that will need to be replaced which can be very expensive.