Don’t Let a Clogged Garbage Disposal Ruin Your Day! Learn How to Repair It With Conyers Plumbing.
Every homeowner has faced a clogged garbage disposal at some point. It’s not only frustrating but also can cause unpleasant smells and even damage your kitchen sink. Don’t worry, though! With a few simple steps, you can repair your clogged garbage disposal without the help of a professional plumber. In this blog post, Conyers Plumbing, your Hillsborough County, FL plumbing company, will guide you through each step of the process.
Section 1: Safety First
Before you begin, make sure you are fully aware of the safety measures you need to follow. First, turn off the disposal by unplugging it or turning off the circuit breaker. Don’t forget to wear gloves to protect your hands from sharp edges.
Section 2: Identify the Cause of the Clog
Take a flashlight and look inside the drain to find what is causing the clog. If you see any visible objects such as food leftovers, remove them carefully using tongs or pliers.
Section 3: Try Using Hot Water and Dish Soap
If the previous step didn’t work, try pouring hot water down the drain for several minutes while running your garbage disposal. This will help to break up and wash away any remaining debris. Add some dish soap to the drain for extra help.
Section 4: Use a Plunger
The next step is to use a plunger; it helps to create suction and pressure to remove the clog. Fill the sink with a few inches of water. Place the plunger over the drain, making sure there’s enough water to cover the rubber part. Push and pull the plunger several times until the water starts to drain.
Section 5: Check the Garbage Disposal Blades
If the previous steps didn’t work, the clog might have moved to the blades or impellers. You can use an Allen wrench to move them manually, but be careful not to damage them. Insert the wrench in the hole at the bottom of the disposal, wiggle it back and forth until it moves freely. Don’t forget to turn off the power source before attempting this step.
Section 6: Clean the Disposal
Once the clog is gone, it’s time to clean your garbage disposal to prevent any future clogging. You can use a mixture of ice cubes and rock salt to clean the blades. Pour half a cup of rock salt and several ice cubes into the drain, then turn on the disposal and run cold water for a minute.
Section 7: Keep Your Garbage Disposal Clog-Free
To prevent further clogs, you can follow these tips. Avoid putting hard or fibrous materials into the disposal, such as bones, fruit pits, greasy food, coffee grounds, and vegetable peels. Also, run cold water for several seconds before and after using the disposal. This will help to wash away any small particles.
Section 8: Call a Professional
If you have tried all the previous steps and your garbage disposal is still clogged or not working correctly, it might be time to call a professional plumber. Don’t hesitate to contact Conyers Plumbing, your Hillsborough County, FL plumbing company, for assistance.
Section 9: Conclusion
A clogged garbage disposal can be an unpleasant experience, but with a few simple steps, you can repair it yourself. Remember always to follow safety measures and call a professional if needed. By following the tips we’ve outlined in this guide, you can help to prevent future clogs and keep your garbage disposal running smoothly.
At Conyers Plumbing, we pride ourselves on providing reliable and efficient plumbing services throughout Hillsborough County, FL. Whether you need a clogged drain repair, water heater installation, or emergency plumbing service, we’ve got you covered. Call us today to schedule an appointment or visit our website for more information.
